Description

5/16″ PRE-CUT STAINLESS STEEL CABLE

This 5/16″ Pre-Cut Stainless Steel Cable is 7 x 19 strand aircraft cable factory cut to the standard lengths used for our boat house lift applications.

Single Line Pull- 45 ft lengths

Double Line Pull- 75 ft lengths

Boat Lift Distributors uses 7 x 19 aircraft cables for all of our boat lift applications. The 7 x 19 specification means the rope has seven strands, each strand containing nineteen wires. Aircraft cables are not suitable for use in aircraft.

If these pre-cut lengths do not fit your application, please go to our 1/4″ galvanized, custom cut cable, that can be cut to any specified length.

Cable Specifications

Type	GAC 7 x 19
Diameter	5/16″
Weight	173.0 / 1000 lb.
Min. Breaking	9,000
Safety Work Load	2,250 lbs.
NOT FOR LIFTING HUMANS
NOT FOR AIRCRAFT USE

***WARNING**

No product can operate indefinitely at its rated capacity. Wire rope and Cable must be inspected regularly for any deterioration which may result in the loss of original strength. User must determine whether further use of the rope would constitute a safety hazard to life or property. Due to the uncontrollable situations in which this cable is used after purchased, Boat Lift Distributors cannot warranty or be held liable for cable past the purchase date.

Additional information

Weight	N/A
Length	45 Ft, 75 FT

5/16″ Stainless Steel Cable- PRECUT